3,100 PSI 3.1 GPM Cold Water Gas Pressure Washer with Honda GX200 Engine and CP Triplex Pump on Aluminum Frame
The BE Power Equipment B3165HAAS is a commercial-grade cold water gas pressure washer delivering 3,100 PSI at 3.1 GPM, combining a proven Honda GX200 196cc engine with a commercial-grade CP CTG1S P3+ triplex pump on a 116 Aluminum Dealer Frame. Built for rough environments and long work days, this unit is designed for operators who want reliable cleaning performance in a frame material that provides superior corrosion resistance and reduced machine weight.
The aluminum frame resists corrosion more effectively than powder-coated steel over time, particularly in environments with regular water exposure, chemical contact, or outdoor conditions. Whether you're cleaning concrete driveways, vinyl siding, wooden decks, dirty trailers, or farm equipment, the B3165HAAS gives you the power and durability to get the job done.
Built for Serious Outdoor Cleaning
The B3165HAAS is built to tackle tough outdoor cleaning without slowing down. It is well suited for:
- Cleaning home exteriors including siding, decks, driveways, and fences
- Stripping paint and cleaning masonry
- Vehicle, trailer, and equipment washing
- Farm and agricultural equipment cleaning
- Concrete and hard surface cleaning
- Construction site cleanup and surface preparation
Features
Honda GX200 Engine
The B3165HAAS is powered by the Honda GX200 196cc OHV recoil start engine, a commercial-grade engine known for reliable starting, fuel efficiency, and long service life. Key engine features include:
- Reliable recoil start in all weather conditions
- High output with low vibration
- Fuel-efficient OHV design for longer run times
- Automatic low-oil shutdown to protect the engine from damage
- 3.1 L / 0.8 GAL fuel tank for extended operation between refueling
The Honda GX200 engine is covered under Honda's separate engine warranty program.
Commercial-Grade CP CTG1S Triplex Pump with External Unloader
Paired with the Honda engine is a commercial-grade CP CTG1S P3+ triplex pump with external unloader and adjustable injector. The triplex design delivers smoother pressure output and longer service life than axial pump configurations, making the B3165HAAS well suited for regular commercial cleaning use. Key pump features include:
- P3+ commercial pump class for high-frequency cleaning applications
- Thermal relief valve to prevent pump damage during extended idle periods
- Smooth, consistent pressure delivery at 3,100 PSI
External Unloader with Adjustable Injector
The external unloader regulates water pressure and keeps the pump cool in bypass mode, extending component life and performance. The adjustable injector allows detergent concentration to be set to match different surfaces and cleaning products, giving you greater flexibility than a fixed injector configuration.
116 Aluminum Dealer Frame
The B3165HAAS is built on the 116 Aluminum Dealer Frame — a hand-truck style platform constructed from aluminum rather than powder-coated carbon steel. Aluminum provides superior corrosion resistance in environments with regular water exposure, chemical contact, or high humidity, and reduces overall machine weight. The frame includes onboard storage for the hose, wand, and nozzles, with stabilizing feet for steady operation.
50-Foot x 3/8" Steel Braided High-Pressure Hose
The included 50' x 3/8" QC single wire braided rubber hose provides durability and extended reach for cleaning large areas without repositioning the machine. The 3/8" diameter supports the full 3.1 GPM flow rate of this unit.
36" Insulated Spray Wand and Trigger Gun
The included 36" QC insulated spray wand provides reach and control for high, low, and hard-to-reach cleaning angles. The insulated design reduces heat transfer to the operator during prolonged use, and the quick-connect system makes nozzle changes fast and straightforward.
4 Quick-Connect Spray Nozzles
Four quick-connect nozzles cover a full range of cleaning applications:
-
15°: Heavy-duty cleaning and surface stripping
-
25°: General-purpose washing
-
40°: Rinsing or cleaning delicate surfaces
-
Soap: Applying detergents and degreasers through the adjustable injector
10" Premium Flat-Free Tires
The 10" Premium flat-free tires are designed to roll over rough terrain, gravel, and jobsite debris without requiring air inflation — no flats, no downtime.
Safety Features
-
Automatic low-oil shutdown: Turns off the engine if oil drops below a safe operating level
-
Thermal relief valve: Releases built-up heat from the pump during extended idle periods
Warranty and Factory Testing
The B3165HAAS is backed by a 3-year limited warranty from BE Power Equipment. The Honda GX200 engine is covered separately under Honda's manufacturer warranty program.
Each unit is functionally tested at the factory before shipping. Your pressure washer may arrive with minimal residual oil or fuel odor, which confirms the unit has passed quality testing and is ready for use.
Product Specifications
-
Pressure: 3,100 PSI
-
Flow Rate: 3.1 GPM
-
Engine: Honda GX200 196cc OHV, Recoil Start
-
Pump: CP CTG1S Triplex, P3+ Class, External Unloader, Adjustable Injector
-
Drive Type: Gas Direct Drive
-
RPM: 3,450
-
Frame: 116 Aluminum Dealer Frame with Onboard Accessory Storage
-
Hose: 50' x 3/8" QC Single Wire Braided Rubber Hose
-
Spray Wand: 36" QC Insulated Gun/Wand Assembly
-
Nozzles: 4 Quick-Connect, 15°, 25°, 40°, and Soap
-
Wheels: 10" Premium Flat-Free Tires
-
Fuel Tank: 3.1 L / 0.8 GAL
-
Engine Oil Type: 10W-30
-
Pump Oil Type: 30W Non-Detergent
-
Unit Weight: 105 lbs / 47.6 kg
-
Unit Dimensions: 21.0" x 21.0" x 36.0"
-
Series: Commercial
-
Safety Features: Automatic low-oil shutdown, thermal relief valve
-
Warranty: 3-year limited (Honda GX200 engine covered separately by Honda)
-
Factory Testing: Each unit is functionally tested before shipment. Minimal residual oil or fuel odor upon delivery is normal and confirms quality testing has been completed.
Included in the Box
- 50' x 3/8" QC Single Wire Braided Rubber Hose
- 36" QC Insulated Gun/Wand Assembly
- 15°, 25°, 40°, and Soaper QC Nozzles
- Engine Oil, Funnel, and Spark Plug Wrench
Built to Last — Trusted by Professionals
The BE Power Equipment B3165HAAS combines a proven Honda GX200 196cc engine, a commercial-grade CP CTG1S P3+ triplex pump with external unloader and adjustable injector, and a corrosion-resistant aluminum frame into a reliable, mobile cleaning platform. Whether you're maintaining your own property or running a mobile pressure washing operation, the B3165HAAS is built for the demands of regular commercial use.
B3165HAAS — 3,100 PSI 3.1 GPM Cold Water Gas Pressure Washer with Honda GX200 Engine and CP Triplex Pump on Aluminum Frame.
